Kimberley KARAVAN 2021 Installation, Maintenance & Operating Manual Download

Page: 45 / 120

Your Kimberley may be fi tted with an underbed

membrane heater (shown on right fi tted to a Kimberley

Karavan). This heats the mattress and helps prevent

the build up of condensation.

How to use your Underbed Membrane Heater:

1. Connect 12V power lead (location differs by

model, generally located at foot of bed).

2. Heater will be active whenever this power lead

is connected. To turn off heater, disconnect this

power lead.

LED Lighting

LED LIGHTING WARRANTY

Kimberley Kampers will replace LED lighting strips if more than

3 LED’s in a row fail (within 12 months of purchase).

Underbed Membrane Heater (Optional)

LED lighting is used throughout your Kimberley. These lights are low maintenance, use little energy and have a

long service life.

Nominal voltage:

12V (11V to 14.5V range)

Service Life:

10,000 hours (approx. 10 years at 3 hours EVERY NIGHT)

Lights are controlled via either switches on the dash panel, overhead console or on the lights themselves.

IMPORTANT: High voltage from tow vehicle can cause premature failure of LED’s—especially when large

Anderson plugs & high capacity charging wire is used.

NOTE: This plug is only needed for the Karavan.

Summary of Contents for KARAVAN 2021

























































































































Search results

Summary of Contents for KARAVAN 2021

Reviews:

Related manuals for KARAVAN 2021

Brands by name

Popular brands

Kimberley KARAVAN 2021, Installation, Maintenance & Operating Manual

Search results

Summary of Contents for KARAVAN 2021

Reviews:

Related manuals for KARAVAN 2021

Brands by name

Popular brands