Kikusui PWX750ML, User Manual

Page: 92 / 110

92
PWX
PWX750ML
Isolated Analog Interface (Factory option)
Isolated external control input (Voltage control)
Isolated output voltage control
(VPGM_IS) 0 % to 100 % of the rated output voltage
Selectable control voltage range: 0 V to 5 V or 0 V to 10 V
Isolated output current control
(IPGM_IS) 0 % to 100 % of the rated output current
Selectable control voltage range: 0 V to 5 V or 0 V to 10 V
Isolated output
control common Accuracy ±5 % of rtg
Temperature
coefficient ±100 ppm/°C
Input impedance 1 M
Ω
Maximum absolute
applied voltage 0 V to 15 V
Isolated output on/off control Possible logic selections:
Apply a LOW (0 V to 0.5 V) or short-circuit to set the OUT
ON/OFF CONT (pin 18 of the J1 connector) to LOW.
Apply a HIGH (4.5 V to 5 V) or open-circuit to set the OUT
ON/OFF CONT (pin 18 of the J1 connector) to HIGH.
Isolated shutdown control Apply a LOW (0 V to 0.5 V) or short-circuit to set the SHUT-
DOWN (pin 6 of the J1 connector) to LOW.
Isolated monitor signal output (Voltage control)
Isolated voltage monitor (VMON_IS) 0 V to 5 V, 0 V to 10 V
Isolated current monitor (IMON_IS) 0 V to 5 V, 0 V to 10 V
Isolated monitor
common Accuracy ±4 % of rtg
Isolated external control input (Current control)
Isolated output voltage control
(VPGM_IS) 0 % to 100 % of the rated output voltage / 4 mA to 20 mA
Isolated output current control
(IPGM_IS) 0 % to 100 % of the rated output voltage / 4 mA to 20 mA
Isolated output
control common Accuracy 5 % of rtg
Temperature
coefficient ±200 ppm/°C
Input impedance 50
Ω
Isolated output on/off control Possible logic selections:
Apply a LOW (0 V to 0.5 V) or short-circuit to set the OUT
ON/OFF CONT (pin 18 of the J1 connector) to LOW.
Apply a HIGH (4.5 V to 5 V) or open-circuit to set the OUT
ON/OFF CONT (pin 18 of the J1 connector) to HIGH.
Isolated shutdown control Apply a LOW (0 V to 0.5 V) or short-circuit to set the SHUT-
DOWN (pin 6 of the J1 connector) to LOW.
Isolated monitor signal output (Current control)
Isolated voltage monitor (VMON_IS) 4 mA to 20 mA
Isolated current monitor (IMON_IS) 4 mA to 20 mA
Isolated monitor
common Accuracy 4 % of rtg
Load impedance 500
Ω
or less