Kikusui PWX750ML, User Manual

Page: 90 / 110

90
PWX
PWX750ML
Control features
Other features
External
control
1
1 J1 connector on the rear panel
Output voltage control
(VPGM) 0 % to 100 % of the rated output voltage
Selectable control voltage range: 0 V to 5 V or 0 V to 10 V
Accuracy 5 % of rtg
Output current control
(IPGM) 0 % to 100 % of the rated output current
Selectable control voltage range: 0 V to 5 V or 0 V to 10 V
Accuracy 5 % of rtg
Output on/off control
OUTPUT ON/OFF CONT Possible logic selections:
Turn the output on using a LOW (0 V to 0.5 V) or short-circuit,
turn the output off using a HIGH (4.5 V to 5 V) or open-circuit.
Turn the output on using a HIGH (4.5 V to 5 V) or open-circuit,
turn the output off using a LOW (0 V to 0.5 V) or short-circuit.
Output shutdown control
SHUT DOWN Turns the output off with a LOW (0 V to 0.5 V) or short-circuit.
Alarm clear control
ALM CLR Clears alarms with a LOW (0 V to 0.5 V) or short-circuit.
Master-slave parallel operation Including the master unit, up to four units (all the same
model) can be connected.
Series operation Up to two units (all the same model) can be connected.
Preset memory Up to three sets of the following settings can be saved: the
set voltage, the set current, the set OVP, the set OCP, and
the set UVL.
Key lock Locks the operation of all keys other than the OUTPUT key.
Multichannel
(VMCB) Between master unit and
PC LAN, USB, RS232C
Slave unit LAN