Kikusui PWX750ML, User Manual

Page: 24 / 110

24
PWX
Measured Value Display and Setting Display
The voltage and current displays have the following two states.
• Measured value display
• Setting display
In addition to the voltmeter and ammeter, the PWX750ML can display the power, the set OVP
or OCP, and the system configuration.
Measured value display
The present output voltage and load current are displayed. In this situation, the SET key LED
is off.
p.29
You can change the output voltage and output current in the measured value display.

Power display
In the measured value display, press PWR DSPL to display the output power on the amme-
ter.
The output power is calculated from the measured output voltage and the measured output
current.
When the power is being displayed, the PWR DSPL key lights. Press PWR DSPL again to
turn off the LED and return to the measured value display.
Setting display
Press SET to light its LED and display the present output voltage and output current settings.
Press SET again to return to the measured value display.
When you recall a preset memory entry, the values stored in the preset memory entry are dis-
played on the panel.
See
Lit
Lit