Kikusui PWX750ML, User Manual

Page: 43 / 110

PWX
43
CONFIG Settings
Basic Functions
2
CF16 Panel display brightness setting
Adjusts the panel display brightness. The larger the number, the brighter the display.
Even if you specify the same number, the brightness may be different between individual
products.
The brightness is not proportional to the setting.
CF17 Communication monitor timer setting
p.35
Sets the interval for monitoring SCPI command communication.
The communication monitoring function operates regardless of whether the product is in
remote or local (panel control) mode.
When using local mode (panel control), be sure to specify oFF.
CF20 Remote interface parameter
Selects the remote interface that you want to use.
This parameter is applied when you turn the POWER switch off and on.
CF21 Command language parameter
Selects the command language that is used in remote control messages.
This parameter is applied when you turn the POWER switch off and on.
CF22 Emulation parameter during remote control
Selects the emulation that is used during remote control. If you have set the command lan-
guage to legacy languages, you can only select “Gen” or “PAG.”
This parameter is applied when you turn the POWER switch off and on.
Memo
When multiple units are
used side-by-side, if the
brightness of the panel
display is different
between units, you can
adjust it.
Value Parameter description
1 to 7 Screen brightness (factory default setting: 7).
See
Value Parameter description
oFF Communication monitor timer is set to off (factory default setting).
1 to 3000 1 s, 3 s, 10 s, 30 s, 100 s, 300 s, 1000 s, 3000 s
Value Parameter description
LAn The LAN interface will be used (factory default setting).
uSb The USB interface will be used.
232 The RS232C interface will be used.
Value Parameter description
SCPi The SCPI language will be used (factory default setting).
LGCy Legacy languages will be used.
Value Parameter description
nonE Remote control is performed using the PWX750ML commands made by Kikusui
(factory default setting).
5700 Remote control is performed using the N5700/N8700 commands made by Agilent
Technologies.
GEn Remote control is performed using the Genesys series commands made by TDK-
Lambda.
PAG Remote control is performed using the PAG series commands made by Kikusui.
DCS Remote control is performed using the DCS series commands made by Sorensen.