Kikusui PWX750ML, User Manual

Page: 96 / 110

96
PWX
Introduction
The isolated analog interface is an internal option card that makes it possible to use analog
signals to control the PWX Series. This option is installed inside the PWX750ML before ship-
ment. You can use a signal that is isolated from the reference potential of the PWX750ML to
perform the following the following types of control.
• Output voltage control
• Output current control
• Turning output on and off using an external contact
• Output shutdown control using an external contact
• Output voltage monitoring
• Output current monitoring
The following two types of isolated analog interface options are available.
■
Voltage control
You can control by using an external voltage.
You can set the output voltage, set the output current, and perform monitoring by using
0 V to 5 V signals or 0 V to 10 V signals.
■
Current control
You can control by using an external current.
You can set the output voltage, set the output current, and perform monitoring by using
4 mA to 20 mA signals.