Kikusui PWX750ML, User Manual

Page: 19 / 110

PWX
19
Connecting to the Output Terminals
1
Inst
allation
and Prep
aratio
n
Attaching the OUTPUT terminal cover
1
Remove the screw that is attached next to the output terminals on the
PWX750ML.
Use this screw to attach the OUTPUT terminal cover.
2
Place the bottom half of the OUTPUT terminal cover underneath the load
cables connected to the output terminals.
3
Align the hooks of the top half of the OUTPUT terminal cover with the
bottom half of the OUTPUT terminal cover.
4
Pushing the top half of the OUTPUT terminal cover toward the rear
panel, slide the top half of the OUTPUT terminal cover onto the bottom
half.
Continue sliding the cover until you hear a click.
5
Push the OUTPUT terminal cover against the rear panel, and then use
screws to fix the cover in place.
Make sure that both screws are securely fastened.
Memo
Both the top and bottom
of the OUTPUT terminal
cover are the same
shape.
Remove the screws, and
then line up the cover.
Memo
It is easier to slide the
OUTPUT terminal cover
in place if you make the
load cables perpendicular
with the PWX750ML.
Push this part toward the panel.
Continue sliding the cover until
you hear a click.
Top cover
Bottom cover
Line up the two halves so
that the protruding parts of
the top cover are in front of
the protruding parts of the
bottom cover.
After you have lined up the top
and bottom covers, use the
screws to fix them in place.
Screws (M3)