Kikusui PLZ164WL User Manual Download

Page: 54 / 138

PLZ-4WL

Menu

In the menu screen, you can set the PLZ-4WL’s operating conditions and configure functions.

Make sure that the load is off.

If the LOAD LED is lit, press LOAD to turn the load off.

Press MENU (SHIFT+SET/VSET).

The menu screen (item 1) appears.

Use the rotary knob or press and to move to the item that you want
to configure.

The currently selected item is highlighted.

Press ENTER or NEXT (SHIFT+ ).

The menu screen (item 2) appears.

Repeat step 3 and step 4 to move to the setting that you want to set.

Turn the rotary knob to set the setting.

Next, set other conditions.

After you have finished configuring the settings, press MENU
(SHIFT+SET/VSET).

The menu screen will close, and the settings that you configured will be applied.

Setu

2. Confi

uration

4. Model Info

3. Calibration

Menu

Menu screen (item 1) display

Memo

Press MENU
(SHIFT+SET/VSET) to
exit the menu.
Press PREV (SHIFT+

)

to return to the previous
screen.

All the configuration settings, except for remote sensing, are enabled after you turn the
power switch off and then on again.

Summary of Contents for PLZ164WL











































































































































Search results

Summary of Contents for PLZ164WL

Reviews:

Related manuals for PLZ164WL

Brands by name

Popular brands

Kikusui PLZ164WL, User Manual

Search results

Summary of Contents for PLZ164WL

Reviews:

Related manuals for PLZ164WL

Brands by name

Popular brands