Kikusui PLZ164WL User Manual Download | Manualshive

Page: 2 / 138

background image

2

PLZ-4WL

This manual is intended for users of the product or persons
teaching other users on how to operate the product.

The manual assumes that the reader has knowledge about
Power Supply.

• User’s manual (this manual)

User's manual is intended for first-time users of the PLZ-
4WL series. It gives an overview of the PLZ-4WL series and
describes various settings, measurement procedures,
maintenance, safety precautions, etc.
This manual is designed to be read from beginning to end.
You can review this manual when you are confused about
an operation or when a problem occurs.

• The communication interface manual

The communication interface manual describes the content
of the commands.
The interface manual is written for readers with sufficient
basic knowledge of how to control instruments using a
personal computer.

• Quick Reference

The quick reference briefly explains the panel description
and the basic operation of the PLZ-4WL.

• Setup Guide

The setup guide is intended for first-time users of the PLZ-
4WL series. It gives an overview of the PLZ-4WL series,
connecting procedures, safety precautions, etc. Please read
through and understand this guide before operating the
product.

PDF and HTML files are included in the accompanying
CDROM. Adobe Reader 9.2 or later is required to view the
PDF files. Microsoft Internet Explorer 9 or later is required to
view the HTML files.

If you find any incorrectly arranged or missing pages in the
manual, they will be replaced. If the manual gets lost or soiled,
a new copy can be provided for a fee. In either case, please
contact Kikusui distributor/agent, and provide the “Kikusui Part
No.” given on the cover.

The Operation Manual has been prepared with the utmost
care; however, if you have any questions, or note any errors or
omissions, please contact Kikusui distributor/agent.

Product ROM versions that this manual
covers

This manual applies to products with firmware versions 1.0X.

When contacting us about the product, please provide us with:

The model (marked in the top section of the front panel)
The ROM version (see page 16)
The serial number (marked in the rear panel)

Trademark acknowledgements

Microsoft and Windows are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/
or other countries.

Other company names and product names used in this
manual are generally trademarks or registered trademarks of
the respective companies.

Copyrights

Reproduction and reprinting of operation manual, whole or
partially, without our permission is prohibited.

Both unit specifications and manual contents are subject to
change without notice.

©

2010 Kikusui Electronics Corporation

About PLZ-4WL Series Manual

«
1
2
3
4
...
»

Summary of Contents for PLZ164WL











































































































































Reviews:

No comments

Related manuals for PLZ164WL

Brand: Larson Davis Pages: 193

Brand: Facom Pages: 116

Brand: BANTE inststruments Pages: 15

Brand: 3Bays Pages: 21

Vigilant ELM Series

Brand: Eagle Eye Power Solutions Pages: 9

Brand: IFM Pages: 2

Brand: Larson Davis Pages: 536

Brand: M-system Pages: 16

Brand: M-system Pages: 25

Brand: Omicron Lab Pages: 33

Brand: Omicron Lab Pages: 21

Brand: Omicron Lab Pages: 22

Brand: Vectornav Pages: 114

HF Scientific AccUView LED Ex

Brand: Watts Pages: 2

Brand: Facom Pages: 48

Brand: Dewetron Pages: 24

Brand: Environmental Express Pages: 40

PLUS 3631 Series

Brand: insize Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands