Kikusui PLZ164WL User Manual Download

Page: 75 / 138

PLZ-4WL

Sequence Example (Fast Sequence)

Sequenc

Editing program 11

Memo

You can move the cursor
by pressing

and .
To exit the sequence
editing screens, press
PREV (SHIFT+

Press EDIT (SHIFT+A).

The program editing screen appears.

Set the program number to 11.

If the cursor is not blinking at No., press

and

to move it

there. Turn the rotary knob to select the number.

Press to move the cursor to Memo, and enter
“Program11.”

Enter the text using the rotary knob and and .

Press to move the cursor to Mode, and select an
operation mode (CC mode).

Turn the rotary knob to select FCC.

Press to move the cursor to Range, and set the
current and voltage ranges to 50 A and 4 V.

Turn the rotary knob to select 50 A, 4 V.

Press to move the cursor to Loop, and set the
number of times to execute the program to 3.

Turn the rotary knob to select the number.

Press to move the cursor to Last Load, and
select the state that the load will be in after the
sequence ends (select ON).

Turn the rotary knob to select ON.

Press to move the cursor to Last Set, and select
the current that the load will supply after the
sequence ends (select 1 A).

Turn the rotary knob to select the number.

Press to move the cursor to RPTSTEP, and set
the step number of the last step to 15.

Turn the rotary knob to select the number.

Press to move the cursor to TIME BASE, and set
the step execution time to 1 ms.

Turn the rotary knob to set the time.

Press NEXT (SHIFT+ ) or ENTER.

The step value screen appears.

SEQ

No. :

Memo :

Mode : FCC

Loop : 0003

Ran

e : 50A , 4V

SEQ

Last Load : ON
Last Set : 1.000

RPTSTEP : 15

TIME BASE : 1ms

Summary of Contents for PLZ164WL











































































































































Search results

Summary of Contents for PLZ164WL

Reviews:

Related manuals for PLZ164WL

Brands by name

Popular brands

Kikusui PLZ164WL, User Manual

Search results

Summary of Contents for PLZ164WL

Reviews:

Related manuals for PLZ164WL

Brands by name

Popular brands