62
PLZ-4WL
Editing Steps in a Normal Sequence
After you finish configuring the program settings, press NEXT (SHIFT+ ) to configure the
step settings.
You can specify one execution condition per step. One step corresponds to one executed
operation in the executed waveform.
Adding steps
When you press INS (SHIFT+
), a step is inserted above the currently highlighted step.
Insert the number of steps that you want to execute. You can specify up to 256 steps for all of
the up to 10 programs in a normal sequence.
Editing steps
After you have added steps, press
and
to highlight the step that you want to edit. There
are three screens for editing steps. You can switch between screens by pressing NEXT
(SHIFT+ ) and PREV (SHIFT+ ).
Step value
Set the fundamental setting (current, conductance, voltage, or power) value.
Step execution time
Set the time for which the step is executed (0:00:00.001 to 999:59).
SEQ EDIT
PREV
NEXT
CC SET
[
A
]
END
TOTAL 000
SEQ EDIT
PREV
NEXT
7.000
A
CC SET
[
A
]
END
TOTAL 001
001
Press INS
(SHIFT+
).
Step Editing Screen
Contents
Step value
The fundamental setting
Step execution time
The time for which the step will be executed
Step-execution pattern
Load on/off, ramp (step transition), trigger signal
during step execution, and pause
SEQ EDIT
PREV
NEXT
001
0.005
A
CC SET
[
A
]
002 0.010
A
END
TOTAL 002
SEQ EDIT
PREV
NEXT
001
100:00: .
002 000:00: 00.001
[
h : m i n : s . m s
]
END
TOTAL 002
SEQ EDIT
PREV
001
ON OFF OFF OFF
002 OFF OFF OFF OFF
LOAD RAMP TRIG
PAUSE
END
TOTAL 002
Step value
Step execution time
Step-execution pattern
