Kia Carnival Manual Download

Page: 667 / 828

What to do in an emergency

If you have a flat tyre (with tyre mobility kit)

䳜 Do not remove any foreign

objects-such as nails or screws -
that have penetrated the tyre.

䳜 Before using the TMK, read the

precautionary advice printed on
the sealant bottle!

䳜 Provided the car is outdoors,

leave the engine running. Other

wise operating the compressor
may eventually drain the car bat

tery.

䳜 Never leave the TMK unattended

whilst it is being used.

䳜 Do not leave the compressor run

ning for more than 10 min. at a
time or it may overheat.

䳜 Do not use the TMK if the ambi

ent temperature is below -30 C (-
22 F).

䳜 When the tyre and wheel are

damaged, do not use Tyre Mobil

ity Kit for your safety.

Technical Data

䳜 System voltage: DC 12 V
䳜 Working voltage: DC 12 V
䳜 Amperage rating: max. 15 A
䳜 Suitable for use at temperatures:

-30 to 70 C (-22 to 158 F)

䳜 Max. working pressure: 7 bar (101

psi)

䳜 Size

- Compressor: 150 x 130 x 60

mm (5.9 x 5.1 x 2.4 in.)

- Sealant bottle: 115.3 x 87.3

mm (4.5 x 3.4 in.)

- Compressor weight: 620 g (1.36

lbs)

- Sealant volume: 400 ml (24.4

cu. in.)

* Sealant and spare parts can be

obtained and replaced at an
authorised vehicle or tyre dealer.
Empty sealant bottles may be dis

posed of at home. Liquid residue
from the sealant should be dis

posed of by your vehicle or tyre
dealer or in accordance with local
waste disposal regulations.

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Carnival

Reviews:

Related manuals for Carnival

Brands by name

Popular brands

Kia Carnival, Manual

Search results

Summary of Contents for Carnival

Reviews:

Related manuals for Carnival

Brands by name

Popular brands