Kia Carnival Manual Download Page 287

Page: 287 / 828

163

Features of your vehicle

Climate control system

Glove box lamp (if equipped)

The glove box lamp comes on when
the glove box is opened.

NOTICE

To prevent unnecessary charging
system drain, close the glove box
securely after using the glove box.

Climate control system

The climate control system uses
cooling and heating to help maintain
a pleasant environment inside the
vehicle.

System operation

Ventilation

1. Set the mode to the

position.

2. Set the air intake control to the

outside (fresh) air position.

3. Set the temperature control to

the desired position.

4. Set the fan speed control to the

desired speed.

Heating

1. Set the mode to the

position.

2. Set the air intake control to the

outside (fresh) air position.

3. Set the temperature control to

the desired position.

4. Set the fan speed control to the

desired speed.

5. If dehumidified heating is desired,

turn the air conditioning system
on.
䳜 If the windscreen fogs up, set

the mode to the

position.

OKA4070076R

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Carnival

Reviews:

Related manuals for Carnival

Brands by name

Popular brands

Kia Carnival, Manual

Search results

Summary of Contents for Carnival

Reviews:

Related manuals for Carnival

Brands by name

Popular brands