manualshive.com logo in svg

Kia Carnival, Manual, Page: 477 / 828

Share
Download
Kia Carnival Manual Download Page 477

99

6

6

Driving your vehicle

Blind-Spot Collision-Avoidance Warning (BCW)

CAUTION

䳜 The setting of the Warning Timing 

and Warning Volume applies to all 
functions of the Blind-Spot Colli

-

sion-Avoidance Warning.

䳜 Even though 'Normal' is selected 

for Warning Timing, if the vehicles 
approaches at high speed, the ini

-

tial warning activation time may 
seem late.

䳜 Select 'Late' for Warning Timing 

when traffic is light and when 
driving speed is slow.

Blind-Spot Collision-Avoidance 
Warning operation

Warning

Blind-Spot Collision-Avoidance 
Warning will warn and control as 
following operation.
䳜 Vehicle detection
䳜 Collision warning

Vehicle detection

䳜 Warning light will appear in the 

outside rearview mirror.

Blind-Spot Collision-Avoidance 
Warning will operate as following 
circumstances.
䳜 Vehicle speed: Above 20 km/h (12 

mph)

䳜 The speed of the vehicle in the 

blind spot area: Above 10 km/h (7 
mph)

Collision warning

Collision warning will operate when 
the turn signal to change the lane in 
the direction of the vehicle in the 
blind spot area.
䳜 To warn the driver of a collision, 

the warning light on the side view 
mirror will blink. At the same 
time, an audible warning will 
sound.

䳜 When the turn signal is turned off 

or you move away from the lane, 
the collision warning will be can

-

celed and the function will return 
to vehicle detection state.

NOTICE

If collision warning is selected in the 
Blind-Spot Safety setting, collision 
warning will be activated even if you 
approach the lane in the direction of 
the vehicle in the blind spot side.

OKA4050030

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments