manualshive.com logo in svg

Kia Carnival, Manual, Page: 43 / 828

Share
Download
Kia Carnival Manual Download Page 43

19

3

3

Safety features of your vehicle

Seat

WARNING

Never attempt to adjust the 2nd 
row seat whilst the vehicle is moving 
or the seat is occupied as the seat 
may suddenly move and cause the 
passenger on the seat to be injured.

Seatback angle (2nd, 3rd row seat)

To recline the seatback:
1. Pull up the seatback recline lever 

or strap.

2. Hold the lever or strap and adjust 

the seatback of the seat to the 
position you desire.

3. Release the lever or strap and 

make sure the seatback is locked 
in place. (The lever MUST return 
to its original position for the 
seatback to lock.)

Seatback angle (2nd, 3rd row cen

-

tre seat)

To recline the seatback:
1. Pull the centre seatback adjust

-

ment lever (1) located on top of 
centre seatback upward.

2. Hold the lever and adjust the 

seatback of the centre seat to the 
position you desire.

3. Release the lever and make sure 

the seatback is locked in place. 
(The lever MUST return to its 
original position for the seatback 
to lock.)

OKA4030022

OKA4030023L

OKA4030025L

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments