Kia Carnival Manual Download Page 152

Page: 152 / 828

Features of your vehicle

Sliding door

ON or the driver's door is closed
with the smart key with you.

You can activate or deactivate the
Easy Access Function from the User
Settings Mode on the LCD display.
For more details, refer to "User set

tings mode" on page 4-96. If your
vehicle is equipped with infotain

ment system, please refer to the
infotainment system manual sepa

rately supplied.

Sliding door

Opening the sliding door

䳜 Once the doors are unlocked, it

may be opened by pulling the
door handle and sliding the door
towards the rear of the vehicle
(for manual sliding doors).

䳜 Once the doors are unlocked, it

may be opened by pulling the
door handle once. And then the
sliding door will be opened (for
power sliding doors).

Closing the sliding door

OKA4040007

OKA4040010

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Carnival

Reviews:

Related manuals for Carnival

Brands by name

Popular brands

Kia Carnival, Manual

Search results

Summary of Contents for Carnival

Reviews:

Related manuals for Carnival

Brands by name

Popular brands