manualshive.com logo in svg

Kia Carnival, Manual, Page: 61 / 828

Share
Download
Kia Carnival Manual Download Page 61

37

3

3

Safety features of your vehicle

Seat

Relaxion seat 

Relaxion seats distribute body pres

-

sure and concentrated weight on 
specific body parts that occur whilst 
sitting in the same position for a 
long period of time. The seat 
relieves fatigue and discomfort by 
providing the optimal sit position.

CAUTION

Take the following precautions 
when using the relaxion seat:
䳜 Do not use the relaxion seat 

whilst the vehicle is moving. Using 
the relaxion seat could increase 
the risk of injuries in the event of 
a collision or sudden stop.

䳜 Do not use the relaxion seat 

whilst the vehicle is moving. The 
shoulder belt may not adhere to 
your chest firmly.

If you press the one touch switch 
(1), the seat is automatically 
adjusted to the relaxion seat posi

-

tion.
䳜 The seat cushion and seatback 

angle will be adjusted.

Relaxion function

ODL3039016

OKA4030097

OKA4030166N

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments