manualshive.com logo in svg

Kia Carnival, Manual, Page: 189 / 828

Share
Download
Kia Carnival Manual Download Page 189

65

4

4

Features of your vehicle

Fuel filler door

Diesel

5. To remove the fuel tank cap (2), 

turn it counterclockwise. You may 
hear a hissing noise as the pres

-

sure inside the tank equalizes.

6. Place the cap on the fuel filler 

door.

NOTICE

The fuel filler door will unlock when 
Driver's door is unlocked.
To unlock the fuel filler door:
䳜 Press the unlock button on your 

smart key.

䳜 Press the central door unlock but

-

ton on armrest trim of driver's 
door.

䳜 Pull the driver䳓s inside door handle 

outward.

The fuel filler door will lock when all 
doors are locked.
To lock the fuel filler door:
䳜 Press the lock button on your 

smart key.

䳜 Press the central door lock button 

on armrest trim of driver's door.

* All doors and fuel door will auto

-

matically lock after the vehicle 
speed exceeds 15 km/h (9.3 mph).

Fuel door is also locked when vehicle 
speed exceeds 15km/h(9.3 mph).

WARNING

Before refuelling, be sure to check 
what type of fuel is used for your 
vehicle.
If you put diesel fuel into a petrol-
powered vehicle or petrol into a die

-

sel-powered vehicle, it may affect 
the fuel system and cause serious 
damage to the vehicle.

NOTICE

If the fuel filler door does not open 
because ice has formed around it, 
tap lightly or push on the door to 
break the ice and release the door. 
Do not pry on the door. If necessary, 
spray around the door with an 
approved de-icer fluid (do not use 
radiator anti-freeze) or move the 
vehicle to a warm place and allow 
the ice to melt.

OKA4040055

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments