Kia Carnival Manual Download Page 174

Page: 174 / 828

Features of your vehicle

Power tailgate

operate the tailgate automatically
again.

WARNING

䳜 Never intentionally place any

object or part of your body in the
path of the power tailgate to
make sure the automatic reversal
operates.

䳜 Never operate power tailgate

attached with any heavy objects
(ex. bicycles). It could damage the
power tailgate.

How to reset the power tailgate

If the battery has been discharged
or disconnected, or if the related
fuse has been replaced or discon

nected, for the power tailgate to
operate normally, reset the power
tailgate as follow:
1. Automatic Transmission:

Make sure the gear is changed to
P (Park) position.

2. Whilst Pressing the tailgate close

button, press the tailgate handle
switch for more than 3 seconds.
(the buzzer will sound)

3. Close the tailgate using the but

ton.

If the power tailgate does not work
properly after the above procedure,
have the system checked by a pro

fessional workshop. Kia recom

mends to visit an authorised Kia
dealer/service partner.

NOTICE

If the power tailgate does not oper

ate normally, check again if the gear
is in the correct position.

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Carnival

Reviews:

Kia Carnival, Manual, Page: 174 / 828

Search results

Summary of Contents for Carnival

Reviews: