Kia Carnival Manual Download

Page: 461 / 828

Driving your vehicle

Forward Collision-Avoidance Assist (FCA)

(Sensor fusion)

authorised Kia dealer/service part

ner.

WARNING

䳜 Even though the warning mes

sage or warning light does not
appear on the cluster, Forward
Collision-Avoidance Assist may
not properly operate.

䳜 Forward Collision-Avoidance

Assist may not properly operate
in an area (e.g. open terrain),
where any substance are not
detected after turning ON the
engine.

Limitations of Forward Collision-
Avoidance Assist

Forward Collision-Avoidance Assist
may not operate normally, or it may
operate unexpectedly under the fol

lowing circumstances:
䳜 The detecting sensor or the sur

roundings are contaminated or
damaged

䳜 The temperature around the

front view camera is high or low

䳜 The camera lens is contaminated

due to tinted, filmed or coated
windscreen, damaged glass, or
sticky foreign material (sticker,
bug, etc.) on the glass

䳜 Moisture is not removed or frozen

on the windscreen

䳜 Washer fluid is continuously

sprayed, or the wiper is on

䳜 Driving in heavy rain or snow, or

thick fog

䳜 The field of view of the front view

camera is obstructed by sun glare

䳜 Street light or light from an

oncoming vehicle is reflected on
the wet road surface, such as a
puddle on the road

䳜 An object is placed on the dash

board

䳜 Your vehicle is being towed
䳜 The surrounding is very bright
䳜 The surrounding is very dark, such

as in a tunnel, etc.

䳜 The brightness changes sud

denly, for example when entering
or exiting a tunnel

䳜 The brightness outside is low, and

the headlamps are not on or are
not bright

䳜 Driving through steam, smoke or

shadow

䳜 Only part of the vehicle, pedes

trian or cyclist is detected

䳜 The vehicle in front is a bus, heavy

truck, truck with a unusually
shaped luggage, trailer, etc.

䳜 The vehicle in front has no tail

lights, tail lights are located
unusually, etc.

䳜 The brightness outside is low, and

the tail lamps are not on or are
not bright

䳜 The rear of the front vehicle is

small or the vehicle does not look
normal, such as when the vehicle
is tilted, overturned, or the side of
the vehicle is visible, etc.

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Carnival

Reviews:

Related manuals for Carnival

Brands by name

Popular brands

Kia Carnival, Manual

Search results

Summary of Contents for Carnival

Reviews:

Related manuals for Carnival

Brands by name

Popular brands