manualshive.com logo in svg

Kia Carnival, Manual, Page: 660 / 828

Share
Download
Kia Carnival Manual Download Page 660

What to do in an emergency

28

7

If you have a flat tyre (with tyre mobility kit)

If you have a flat tyre (with tyre 
mobility kit) (if equipped)

For safe operation, carefully read 
and follow the instructions in this 
manual before use.

Type A

Type B (if equipped)

1. Compressor
2. Sealant bottle

The tyre Mobility Kit is a temporary 
fix to the tyre and We recommend 
that you have your vehicle inspected 
by an authorised Kia dealer/service 
partner.

CAUTION

One sealant for one tyre

When two or more tyres are flat, do 
not use the tyre mobility kit 
because the supported one sealant 
of Tyre Mobility Kit is only used for 
one flat tyre.

WARNING

Do not use the Tyre Mobility Kit to 
repair punctures in the tyre walls. 
This can result in an accident due to 
tyre failure.

WARNING

Have your tyre repaired as soon as 
possible. The tyre may loose air 
pressure at any time after inflating 
with the Tyre Mobility Kit.

Introduction

With the Tyre Mobility Kit you stay 
mobile even after experiencing a 
tyre puncture.

The system of compressor and 
sealing compound effectively and 
comfortably seals most punctures 
in a passenger car tyre caused by 
nails or similar objects and reinflates 
the tyre.

OKA4060031

OKA4060032

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments