manualshive.com logo in svg

Kia Carnival, Manual, Page: 479 / 828

Share
Download
Kia Carnival Manual Download Page 479

101

6

6

Driving your vehicle

Blind-Spot Collision-Avoidance Warning (BCW)

When the outside rearview mirror 
warning light is not working prop

-

erly, the warning message will 
appear on the cluster for several 
seconds, and the master warning 

light (

) will illuminate. Have 

Blind-Spot Collision-Avoidance 
Warning be inspected by a profes

-

sional workshop. Kia recommends to 
visit an authorised Kia dealer/ser

-

vice partner.

Blind-Spot Collision-Avoidance 
Warning disabled

When the rear bumper around the 
rear corner radar or sensor is cov

-

ered with foreign material, such as 
snow or rain, or installing a trailer or 
carrier, it can reduce the detecting 
performance and temporarily limit 
or disable Blind-Spot Collision-
Avoidance Warning.

If this occurs, a warning message 
will appear on the cluster. However 
it is not a malfunction.

Blind-Spot Collision-Avoidance 
Warning will operate normally when 
such foreign material or trailer, 
other equipments is removed, and 
then the engine is restarted. Always 
keep it clean.

If Blind-Spot Collision-Avoidance 
Warning does not operate normally 
vehicle rear luggage, other equip

-

ment or foreign material is 
removed, have Blind-Spot Collision-
Avoidance Warning be inspected by 
a professional workshop. Kia recom

-

mends to visit an authorised Kia 
dealer/service partner.

WARNING

䳜 Even though the warning mes

-

sage does not appear on the clus

-

ter, Blind-Spot Collision-Avoidance 
Warning may not properly oper

-

ate.

䳜 Blind-Spot Collision-Avoidance 

Warning may not properly oper

-

ate in an area (e.g. open terrain) 
where any substance are not 
detected right after the engine is 
turned on, or when the detecting 
sensor is blocked with foreign 
material right after the engine is 
turned on.

CAUTION

Turn off Blind-Spot Collision-Avoid

-

ance Warning to install a trailer, car

-

OMQ4050230L

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments