manualshive.com logo in svg

Kia Carnival, Manual, Page: 584 / 828

Share
Download
Kia Carnival Manual Download Page 584

Driving your vehicle

206

6

Reverse Parking Collision-Avoidance Assist (PCA)

'Rear Active Assist' or 'Rear Warn

-

ing Only' can be turned on or off.

Warning Timing

With the vehicle on, select 'Driver 
Assistance → Warning Timing' from 
the Settings menu to change the 
initial warning activation time for 
Reverse Parking Collision-Avoidance 
Assist.

Warning Volume

With the vehicle on, select 'Driver 
Assistance → Warning Volume' from 
the Settings menu to change the 
Warning Volume to 'High', 'Medium', 

or 'Low' for Reverse Parking Colli

-

sion-Avoidance Assist.

If you change the Warning Volume, 
the warning volume of other Driver 
Assistance functions may change.

Reverse Parking Collision- Avoid

-

ance Assist operation

Operating conditions

If 'Rear Active Assist' or 'Rear Warn

-

ing Only' is set from the Settings 
menu, Reverse Parking Collision-
Avoidance Assist will be in the ready 
status when the following condi

-

tions are satisfied:
䳜 The tailgate is closed
䳜 The gear is shifted to R (Reverse)
䳜 Vehicle speed is below 10 km/h (6 

mph)

䳜 Reverse Parking Collision-Avoid

-

ance Assist components such as 
the rear view camera and the rear 
ultrasonic sensors are in normal 
conditions

When Reverse Parking Collision- 
Avoidance Assist activates, a line 
appears behind the vehicle image in 
the instrument cluster.

OMQ4AH050334

OMQ4041606

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments