manualshive.com logo in svg

Kia Carnival, Manual, Page: 749 / 828

Share
Download
Kia Carnival Manual Download Page 749

63

8

8

Maintenance

Fuses

WARNING

Fuse replacement

䳜 Never replace a fuse with any

-

thing but another fuse of the 
same rating.

䳜 A higher capacity fuse could cause 

damage and possibly a fire.

䳜 Never install a wire or aluminium 

foil instead of the proper fuse 
even as a temporary repair. It 
may cause extensive wiring dam

-

age and a possible fire.

䳜 Do not arbitrarily modify or add-

on electric wiring of the vehicle.

CAUTION

Do not use a screwdriver or any 
other metal object to remove fuses 
because it may cause a short circuit 
and damage the system.

NOTICE

䳜 When replacing fuse, turn the 

ignition "OFF" and turn off 
switches of all electrical devices 
then remove battery (-) terminal.

䳜 The actual fuse/relay panel label 

may differ from equipped items.

CAUTION

䳜 When replacing a blown fuse or 

relay with a new one, make sure 
the new fuse or relay fits tightly 

into the clips. The incomplete fas

-

tening fuse or relay may cause 
the vehicle wiring and electric 
systems damage and a possible 
fire.

䳜 Do not remove fuses, relays and 

terminals fastened with bolts or 
nuts. The fuses, relays and termi

-

nals may be fastened incom

-

pletely, and it may cause a 
possible fire. If fuses, relays and 
terminals fastened with bolts or 
nuts are blown, consult a profes

-

sional workshop. Kia recom

-

mends to consult an authorised 
Kia dealer/service partner.

䳜 Do not input any other objects 

except fuses or relays into fuse/
relay terminals such as a driver or 
wiring. It may cause contact fail

-

ure and system malfunction.

䳜 Do not plug in screwdrivers or 

aftermarket wiring into the ter

-

minal originally designed for fuse 
and relays only. The electrical 
system and wiring of the vehicle 
interior may be damaged or 
burned due to contact failure.

䳜 If you directly connect the wire on 

the taillight or replace the bulb 
which is over the regulated capac

-

ity to install trailers etc., the inner 
junction block can get burned.

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments