manualshive.com logo in svg

Kia Carnival, Manual, Page: 527 / 828

Share
Download
Kia Carnival Manual Download Page 527

149

6

6

Driving your vehicle

Cruise Control (CC)

2. Press the Driving Assist button at 

the desired speed. The set speed 
and Cruise (

) indicator 

will illuminate on the cluster.

3. Release the accelerator pedal.

Vehicle speed will maintain the set 
speed even when the accelerator 
pedal is not depressed.

NOTICE

On a steep sloped road, the vehicle 
may slightly slow down or speed up 
whilst driving uphill or downhill.

To increase set speed

䳜 Push the + switch up and release 

it immediately. The set speed will 
increase by 1 km/h (1 mph) each 
time the switch is operated in this 
manner.

䳜 Push the + switch up and hold it 

whilst monitoring the set speed 
on the cluster. The set speed will 
increase to the nearest multiple 
of ten (multiple of five in mph) at 
first, and then increase by 10 km/

h (5 mph) each time the switch is 
operated in this manner.
Release the switch when the 
desired speed is shown and the 
vehicle will accelerate to that 
speed.

To decrease set speed

䳜 Push the - switch down and 

release it immediately. The set 
speed will decrease by 1 km/h (1 
mph) each time the switch is 
operated in this manner.

䳜 Push the - switch down and hold 

it whilst monitoring the set speed 
on the cluster. The set speed will 
decrease to the nearest multiple 
of ten (multiple of five in mph) at 
first, and then decrease by 10 
km/h (5 mph) each time the 
switch is operated in this manner.
Release the switch at the speed 
you want to maintain.

OKA4040556N

OKA4040557N

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments