manualshive.com logo in svg

Kia Carnival, Manual, Page: 376 / 828

Share
Download
Kia Carnival Manual Download Page 376

Infotainment system

36

5

Declaration of Conformity

䳜 Consult the dealer or an experi

-

enced radio/TV technician for 
help.

Caution: Any changes or modifica

-

tions to this device not explicitly 
approved by manufacturer could 
void your authority to operate this 
equipment.

This device complies with part 15 of 
the FCC Rules. Operation is subject 
to the following two conditions: (1) 
This device may not cause harmful 
interference, and (2) this device 
must accept any interference 
received, including interference that 
may cause undesired operation.

This equipment complies with FCC 
radiation exposure limits set forth 
for an uncontrolled environment.T

This equipment should be installed 
and operated with minimum 20 cm 
between the radiator and your 
body. This transmitter must not be 
co-located or operating in conjunc

-

tion with any other antenna or 
transmitter unless authorised to do 
so by the FCC.

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments