manualshive.com logo in svg

Kia Carnival, Manual, Page: 465 / 828

Share
Download
Kia Carnival Manual Download Page 465

87

6

6

Driving your vehicle

Forward Collision-Avoidance Assist (FCA)

(Sensor fusion)

sarily warn the driver and control 
the brake. Always check the traf

-

fic conditions around the vehicle.

䳜 Driving on a sloped road

Forward Collision-Avoidance 
Assist may not detect other vehi

-

cles, pedestrians or cyclists in 
front of you whilst driving uphill 
or downhill, adversely affecting 
the performance of the sensors.
This may result in unnecessary 
warning, braking assist or no 
warning, braking assist when nec

-

essary.
Also, vehicle speed may rapidly 
decrease when a vehicle, pedes

-

trian or cyclist ahead is suddenly 
detected.
Always have your eyes on the 
road whilst driving uphill or down

-

hill and if necessary, steer your 
vehicle and depress the brake 
pedal to reduce your driving speed 
in order to maintain a safe dis

-

tance.

䳜 Changing lanes

[A]: Your vehicle, [B]: Lane chang

-

ing vehicle
When a vehicle moves into your 
lane from an adjacent lane, it can

-

not be detected by the sensor 

ODEEV069243NR

ODEEV069244NR

ODEEV069245NR

OADAS030SDY

Summary of Contents for Carnival





























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments