Keysight Technologies N7020A, User Manual

Page: 35 / 92

35
Keysight N7020A and N7024A Power Rail Probes
User’s Guide
4 Safety and Regulatory
Information
These probes have been designed and tested in accordance with accepted
industry standards, and have been supplied in a safe condition.
Throughout this manual and specifically in this chapter, there are warnings,
cautions, and notes that must be followed by the user to ensure safe operation
and to maintain the product in a safe condition. If the probe is used in a manner
not specified by the manufacturer, the protection provided by the equipment may
be impaired.
Also, note the external markings on the probe that are described in this document.
WARNING
To avoid personal injury and to prevent fire or damage to this product or
products connected to it, review and comply with the following safety
precautions. Be aware that if you use this probe assembly in a manner not
specified, the protection this product provides may be impaired.
CAUTION
These probes are for use only on circuits that are not directly connected to mains.
Do not use the probe for measurements on mains circuits.
WARNING
Use Only Grounded Instruments.
Do not connect the probe’s ground lead to a potential other than earth ground.
Always make sure the probe and oscilloscope are grounded properly. Before
making connections to the input leads of this probe, ensure that the probe’s
output connector is attached to the channel input of the oscilloscope and the
oscilloscope is properly grounded.