Keysight Technologies N7020A, User Manual

Page: 27 / 92

Specifications and Characteristics
3
N7020A and N7024A Power Rail Probes User’s Guide 27
NOTE
A few electrical specifications and characteristics of the probe vary based on the connection
mechanism used to connect the probe to DUT. This variation is listed in the table below. To
know about these connection mechanisms, see “Connecting to the DUT" on page 44.
Table 6 N7020A Electrical Characteristics and Specifications
Attribute
Characteristics (based on probe’s connection configuration)
With N7022A
Main Cable
With N7021A
Pigtail Cable &
N7022A Main
Cable
With N7023A
Browser
With N7032A
Browser &
N7022A Main
Cable
With N7033A
Browser &
N7022A Main
Cable
Probe Bandwidth (–3 dB) 2 GHz 2 GHz 350 MHz (using
the included
ground spring)
2 GHz 2 GHz
Maximum Input Voltage
(non-destructive)
±30V peak input
(mains isolated)
Attenuation Ratio 1.1:1
Offset Range ± 24V
Input Impedance at DC
*
50 k
Ω
±2%
Active Signal Range ± 850 mV (about offset voltage)
Probe Noise (at 2 GHz) 10% increase in the noise of the connected oscilloscope
Output Termination 50
Ω
scope input
Probe Type Single Ended
* Warranted specification.All other characteristics are typical.
Table 7 Mechanical Characteristics of N7020A Probe and Browsers
Description N7020A Probe N7023A Browser N7032A Browser N7033A Browser
Weight 50 g 26 g 10 g 10 g
Dimensions See Figure 5 on page 29 for dimensions.