Keysight Technologies N7020A, User Manual

Page: 12 / 92

12 N7020A and N7024A Power Rail Probes User’s Guide
1
N7020A / N7024A Probes - Overview
N7023A Power Rail
Probe Browser
1 Provides a convenient way to probe the power
rails with a number of accessories available for
connection to DUT. The trade-off for this
convenience is the lower signal fidelity than the
N7021A pigtail cables or the N7022A main cable
or other two supported browsers. Mechanically,
this browser is similar to a traditional passive
probe and is used in the same manner.
✓ ✓
N7023A Browser Accessories
(N7023A bowser is shipped with the following accessories.)
Ground Spring 2.5 mm 1 Provides the highest performance connection for
the N7023A probe browser.
✓ ✓
Ground Lead 15 cm 1 Used to reach grounding locations that are
farther away from the probing location than can
be reached by the ground spring. However, the
longer lead means it has a larger inductance in
the ground return path which corresponds to a
lower performance than using the ground spring.
✓ ✓
Spring-loaded Probe
Tips
3 Allows you to probe signals with less
susceptibility to vibration or movement than
traditional rigid tips. The spring loaded tips work
when they are either partially or fully compressed
and are protected against over compression
damage.
Note : One spring-loaded tip is pre-installed by
Keysight into the N7023A browser.
These tips are replaceable. To know how to
replace these tips, refer to “Replacing N7023A
Probe Browser Tips" on page 52.
✓ ✓
Rigid Probe Tips 2 Replaceable probe tips. To know how to replace
these tips, refer to “Replacing N7023A Probe
Browser Tips" on page 52.
✓ ✓
Table 1 Standard Accessories
Accessories Quantity
Supplied
Description Shipped with
N7020A Probe N7024A Probe