manualshive.com logo in svg

Keysight Technologies N7020A, User Manual

Share
Download
Keysight Technologies N7020A User Manual Download Page 70

70

N7020A and N7024A  Power Rail Probes User’s Guide

7

Performance Plots

N7024A Input Impedance Plots

This section provides the input impedance plots for various probe configurations 

available for N7024A based on the different probe and probe head combinations.

N7024A Simplified Input Impedance Model

Figure 21

 shows the model used in the measured and modeled input impedance 

plots provided for the N7024A probe in this section. 

In this model, the value of the inductance L varies for various supported probe 

configurations. This value is provided with the input impedance plot of each of 

these probe configurations in this section.

Figure 21

Input Impedance Model for the N7024A Probe

Input Impedance Plot for N7022A Main Cable and N7024A Probe 

Combination

This combination supports the highest bandwidth configuration for the N7024A 

probe. In this combination, the value of the inductance L is zero.

Figure 22

 shows the input impedance looking into the N7022A cable. Any added 

transmission line and/or connection parasitic on the DUT will modify this 

impedance.

Summary of Contents for N7020A





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands