Keysight Technologies N5252A User Manual Download Page 22 | Manualshive

Page: 22 / 62

background image

Computer Setup and Software Installation for N5252A

1.

Keysight IO Libraries Suite

- Download and install the

Keysight IO Libraries Suite

from

Keysight's website.

2.

Keysight M9005A PXIe Chassis drivers

- Refer to the Keysight M9005A PXIe Chassis

User Guide (M9005-90001) "Getting Started with the System" section for installation
instructions. The driver software can be installed from the M9005 PXIe Chassis Product
Software and Information CD included with the shipment, or from the

Chassis Driver page

on Keysight's website.

3.

Vector Network Analyzer software (Network Analyzer application)

- To download your

application firmware, visit the

Keysight N5252A and N5253E system product page

4. Once the software has been installed, refer to "Turning on Your System" below.

Disable "Sleep Mode" on your PC when running the Network Analyzer
application. Leaving it on will cause the application to crash.

There are three software items that need to be installed onto your computer:

• Keysight IO Libraries Suite
• Keysight M9005A PXIe Chassis driver software
• Vector Network Analyzer software - Network Analyzer application

Turning On Your System

Turn on the M9005A chassis first, before turning on your computer.
Turning on the chassis first will normally turn on the system computer by
itself. If not, check the M9005A connections to your computer.

1. Install the M9005A-002 PCIe desktop adapter into your tower PC expansion slot. For an

example, consult the

Keysight M9048A PCIe Desktop Adapter Installation Guide

similar installation).

2. Connect the supplied interface cable (M9005-61301) to the cable port on the back of the

M9005A chassis (MXI-Express x1), then connect the other end of the cable to the PCIe
desktop adapter connection port on the back of the PC. Consult the

M9005A User Guide

for details.

Software Installation

22

N5252-90002 User's Guide

«
...
20
21
22
23
24
...
»

Summary of Contents for N5252A































































Reviews:

No comments

Related manuals for N5252A

Brand: Parr Instrument Pages: 110

PLATINUM Series

Brand: Hach Pages: 64

Brand: Saimo Pages: 101

Brand: Oceanic Pages: 68

Brand: Oceanic Pages: 24

GroundCast DRS611

Brand: Vaisala Pages: 12

Brand: Aethra Pages: 2

Brand: Flymaster Pages: 7

Brand: ADDAC System Pages: 9

Brand: CG Pages: 7

Trimble Ranger 3

Brand: Badger Meter Pages: 20

Brand: A&D Pages: 38

350 Maritime V2

Brand: TESTO Pages: 106

Brand: Bender Pages: 4

Brand: TEKELEK Pages: 3

Xtrinsic MMA8491Q

Brand: Freescale Semiconductor Pages: 4

Brand: Swema Pages: 12

Brand: Kedida Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands