Keysight Technologies N5252A, User Manual

Page: 10 / 62

The N5252A requires a tower computer (not provided) with an available
PCIe slot, monitor, mouse, and keyboard. M9374A modules limit future
extensions above WR6.5. Refer to the M9005A PXIe Chassis User Guide
for computer requirements.
The N5253E requires a laptop or tower computer (not provided).
Two N5253E1 or two N5253E3 systems can be configured to create a 4-
port E-Band system. The N5253E2 system can only be configured for a
2-port system. Refer to the Banded Millimeter Wave Network Analysis
Technical Overview .
Available Accessories for N5252A and N5253E
•
N1913A/14A Power Meter or equivalent
•
E8486A-200 (with Option 002) Waveguide Power Sensor, or U8489A with
E281CS Adapter
•
E281CS and E281DS Waveguide Adapters to 1 mm Coax
•
N1913PM5B Waveguide Power Meter and Waveguide Tapers for alternative
configurations of 110 GHz or higher (note that E-Band 60-90 GHz is too low
for the N1913PM5B)
Limitations
•
Not all applications are supported. See Table 6 on page 11 and the Banded
Millimeter Wave Network Analysis Technical Overview .
•
You cannot configure the system for a mm-wave and a standard VNA system at the
same time, running in the same VNA application. You can, however, perform this
configuration if running in separate VNA applications on the same computer.
•
This is a sensitive measurement apparatus by design and may have some
performance loss when exposed to ambient continuous electromagnetic
phenomenon similar to those used in testing per IEC 61000-4-6 (3V). See Note on
page 60 for details.
•
N5252AW12 - TxRx VNAX Millimeter-wave VDI VNA Extenders, 60-90 GHz
(Option 201). See the
Keysight N5252AWxx Quick Start Guide for details.
o
Cable sets (1.2 m) and power supplies.
o
USB drive with power level data of N5252AW12 extenders and VDI
User's Guide.
•
Cable removal tool, SMB/MMCX (5002-3361)
•
Socket, 5/16 inch (5023-1450)
•
N5262AC12 - WR12 (E-Band, 60-90 GHz) Calibration Kit from VDI. See Figure 6 .
All Bundles Include:
10 N5252-90002 User's Guide