manualshive.com logo in svg

Keysight Technologies J-BERT M8020A, Programming Manual, Page: 301 / 502

Share
Download
Keysight Technologies J-BERT M8020A Programming Manual Download Page 301

Keysight M8070A Programming Guide

301

SCPI Command Reference

5

 

[,<CURR | WHIT>]: Specify whether the user wants to capture in current 

theme or wants to capture in white background.

[,<PNG>]: Specify the format of the image. The default format is PNG.

[,1 | 0]: Specify whether to capture the graph with legends or not.

[,’TabName’]: Specify the tab name on which the graph is supposed to be 

captured.

Description

This query returns data of the image captured from the graph view of the 

plugin in the specified format.

Example

:PLUG:ERAT:GRAP? ‘MyMeasurement’,1000,800,CURR,PNG,1,Graph

Summary of Contents for J-BERT M8020A























































































































































































































































































































































































































































































































Reviews:

No comments