16
3
: Metric-inch interconversion function
3.1
：
Pull out the safety key and press the “PROGRAM” key and “MODE” key at the same time, “SPEED” window displays “M”
means changing kilometers into miles.
3.2
：
Pull out the safety key and press the “PROGRAM” key and “MODE” key at the same time, “SPEED” window displays “KM
means changing miles into kilometers.
4
: Touch button instruction:
4.1
：
“PROG”
：
program select key
：
when the treadmill is stopped ,cycle select the program P0-P36,U01-U03,Fat you prefer.
4.2
：
“MODE”
：
mode select key ,when you select the manual mode which is the normal mode. You can select the Time count-
down
→
distance countdown
→
calories countdown
→
Normal mode. The reposition of default is 30 minutes when in P1-P36.
4.3
：
“START” key
：
when the treadmill is stopped , press the START key to turn on the treadmill. Press “START” key when run-
ning, it will pause.
4.4
：
“STOP” key, when the treadmill is running, stop the treadmill by pressing the STOP key. When the LCD window show the
ERR massage, press the stop key to clear the err massage. When the treadmill is running, press the “STOP” key twice, the
treadmill will stop immediately .
4.5
：
“
＋
” KEY
：
increase the speed when running. Increase the parameter under the body fat testing.
4.6
：
“-” KEY
：
decrease the speed when running. Decrease the parameter under the body fat testing.
4.7
：
“QUICK SPEED” key
：
when the treadmill is running, you can set the speed directly by pressing the quick speed key 3, 6,
9, 12, 15
4.8
：
“ “ KEY
：
Decrease the incline by pressing this key .
4.9
：
“ “ KEY
：
Increase the incline by pressing this key .
4.10
：
“QUICK INCLINE KEY
：
Increase the incline directly by pressing the quick incline key 2, 4, 6, 8, 10
5
: (V)
：
Safety key function
：
In any state, pull-out safety locks, window displays
：
Er-7and sound buzzer BIBI-BI. Then put well the safety lock, all show that the full
light for 2 seconds, then go to manual start mode (the equivalent of clearing reset).
6
: USER program
There are three USER mode
：
U01-U03. In the USER mode, user can access or set your own sport program, press “PROG” key cycle
to “U01-U03”, then press “MODE” key to set or press the “STRAT” key to start moving. Press “MODE” key can set your own pro-
gram (10 section speed and incline). After setting, user can press “START” to start moving. The exclusive program for user will be
saved. User can press “PROG” key cycle to U01-U03 and call directly.
7
: Guidelines for safe use
7.1
：
Put the power cord into the electrical outlet with 10A. Flip this switch to the “ON” position. The screen shines with prompt
sound.
7.2
：
Put the safety key on the correct position,then turn on the power ,the LCD window light is shinning ,and sound “beer”, the
treadmill enter in to the P0 Normal Mode .
– EN –
