14
Information for your safety:
• To avoid injuries as a result of overstress or overload, the
exercise device shall only be operated according to the
instructions.
• Prior to the first commissioning and after approx. 6 opera-
ting days, check if the connections are mechanically secu-
red.
• Regularly check the operability and the proper condition of
the exercising device.
• The safety technical controls are part of the obligations of
the owner and shall be implemented regularly and pro-
perly.
• The security level of the device can only be maintained if
the device is regularly checked for wear and damages.
• Defective or damaged components shall be replaced imme-
diately. Works on the electrical components shall only be
implemented by qualified staff. Only use KETTLER original
spare parts.
• Until repair the device shall no longer be used.
• For care, cleaning and maintenance only use the KETTLER
Device-Care-Set Art.-No. 7921-000
• Please clarify with your general practitioner before you start
the training, whether or not your health conditions allow
you to train with this device. The medical result shall be the
basis for the elaboration of your training program. Wrong
or excessive training can lead to health impairments.
• The treadmill shall only be implemented for its intended pur-
pose, i.e. the walking and running exercise of adults.
• Please consider the maximum user weight.
• Only exercise with attached security key.
• Start the first training units at low speed to make yourself
familiar with the new motion sequences.
• When feeling insecure, grab hold of the handle bars, leave
the treadmill over the side platforms and stop the belt.
Important:
Please also note the safety guidelines in the installation
and assembly instruction.
Safety Switch
• Prior to every training unit, insert the safety key into the
safety switch and attach the string of the safety key to your
clothes. Adapt the length of the string: When “stumbling”
the safety switch shall be released.
• The safety switch was developed to immediately shut down
the drives for the belt and the height adjustment in case you
fall or for emergency situations. Only use the safety switch
for emergency stops. To stop the treadmill during normal
training in a safe, comfortable and proper way under nor-
mal conditions, use the STOP button.
• Check the safety switch prior to the begin of your exercises
• Position yourself on the side platforms and start the belt at
normal speed. Remove the safety key from the safety
switch. The belt must stop immediately. Afterwards reattach
the safety key to the safety switch and the string to your clo-
thes. When the belt is stopped, move backwards. The
safety key must detach from the safety switch. However the
string shall remain attached to the clothes. Afterwards
reattach the safety key back to the safety switch.
Treadmill protection
• By removing the safety key an unauthorised use of the
treadmill through third parties can be avoided. Please keep
the safety key in a safe place and avoid children to get
hold of the safety key.
– EN –
SAFETY GUIDELINES
