83
5.2 Materiale di riempimento
Strato di fondazione:
pietrisco frantumato (granulometria massima 0/16)
Letto del contenitore: sabbia
Avvolgimento del contenitore:
pietrisco frantumato (granulometria massima 0/16)
Area al di fuori dell'avvolgimento del contenitore:
materiale con caratteristiche idonee
Strato di copertura: humus o simile
5.3 Scavo
Premessa del suolo esistente
Lo scavo deve garantire una portata sufficiente. L'impianto se-
paratore può essere installato solo nel suolo a norma ATV-
DVWK-A 127 del
- gruppo G1 o G2 o
- gruppo G3 o G4 con gc minimo = 97%, ove deve essere pre-
vista la formazione di uno smaltimento (drenaggio) sufficiente
dell'acqua di infiltrazione.
Preparazione dello scavo
Lo scavo deve essere orizzontale e livellato per una posa sull'in-
tera superficie. Quale strato di fondazione deve essere previsto
del pietrisco compattato 0/16 (spessore minimo 30 cm,
gc=97%), compattato a strati successivi con uno spessore
dello strato massimo di 30 cm/strato. Per il letto sono necessari
3-10 cm di sabbia, compattata con gc-97%). La distanza tra la
parete dello scavo e il contenitore deve essere pari almeno a
50 cm. Rispetto all'angolo di scarpata devono essere rispettati
i requisiti a norma DIN 4124. La profondità dello scavo deve es-
sere misurata in modo che i limiti del ricoprimento di terra non
vengano superati.
MIN ≤ ricoprimento di terra ≤ MAX (vedere il capitolo "Disegno
quotato").
Posa e collegamento del contenitore
Il contenitore deve essere posato piano nello scavo predispo-
sto, orientato di fronte al condotto delle acque di scarico pre-
disposto, orientato nell'acqua e collegato durevolmente a tenu-
ta stagna ai condotti delle acque di scarico.
Riempimento dello scavo e rabbocco del contenitore
Il riempimento dello scavo deve avvenire a strati successivi con
pietrisco 0/16, in strati di 30 cm/strato al massimo con gc=97%,
compattati con un costipatore leggero. Parallelamente a ciò, il
contenitore deve essere rabboccato d'acqua, in modo che tra
il livello del liquido e il livello del materiale di riempimento vi sia
una differenza massima di 30 cm.
Penetrazione di radici
In caso di installazione nei pressi di alberi, arbusti e piante pe-
renni deve essere impedita con sicurezza la penetrazione delle
radici.
Installazione in terreni in pendenza
In caso di installazione del separatore in un terreno in pendenza
deve essere assolutamente accertato che la spinta delle terre
agente lateralmente in presenza di terreno non naturale sia
contenuta tramite un muro di sostegno sufficientemente resi-
stente.
Profondità priva di gelo in caso di uso annuale
Al momento dell'installazione del separatore prestare assoluta-
mente attenzione alla profondità priva di gelo stabilita local-
mente. Al fine di garantire anche d'inverno un funzionamento
impeccabile, al momento dell'installazione devono essere po-
sati a una profondità di installazione priva di gelo anche i
condotti di mandata e scarico. Di norma, ove non altrimenti in-
dicato dalle autorità, la profondità priva di gelo si trova a circa
80 cm.
5.4 Controlli prima dell'installazione
Immediatamente prima della collocazione del contenitore nello
scavo, l'esperto dell'azienda incaricata dell'installazione deve
controllare e certificare quanto segue:
- Le condizioni intatte della parete del contenitore;
- Lo stato regolare dello scavo, soprattutto rispetto alle misure
e alla massicciata della soletta;
- Le caratteristiche granulometriche del materiale di riempimento.
Struttura della cisterna:
L'installazione nell'acqua freatica è possibile se il livello dell'ac-
qua freatica non supera il bordo superiore del contenitore.
Struttura del pozzetto:
Resistente in caso di installazione nell'acqua freatica fino a 500
mm, misurati dal bordo inferiore del pozzetto.
5. Installazione e montaggio
3-10cm
≥30cm
≥
≥50cm
≥70cm
≥70cm
6
4
5
1
2
3
≥50cm
b nach
DIN 4124
7
1) Strato di fondazione: pietrisco 0/16 compattato con gc ≥ 97%
2) Letto del contenitore: sabbia compattata con gc ≥ 97%
3) Separatore:
ai sensi del calcolo statico
4) Riempimento:
pietrisco 0/16 compattato con gc ≥ 97%
5) Scavo:
G1 o G2 a norma ATV-DVWK-A 127 o G3 o G4 a norma
ATV-DVWK-A 127, compattato con gc ≥ 95%, ove deve
essere prevista la formazione di uno smaltimento (drenaggio)
sufficiente dell'acqua di infiltrazione
6) Strato portante (TS):
Piastra di distribuzione del carico a norma statica per il
gruppo E4 (veicoli pesanti 60). Strato di distribuzione del
carico per il gruppo E2 (autovetture)
7) Bordo superiore del contenitore
Summary of Contents for 99403.10B
Page 144: ...12 DOP Deklaracja wla ciwo ci 144...
Page 145: ...12 DOP Deklaracja wla ciwo ci 145...
Page 146: ...12 DOP Deklaracja wla ciwo ci 146...
Page 147: ...147...