63
6. mise en service
respecter le chapitre consignes de sécurité !
6.1 mettre l'installation en ordre de marche
Il faut rincer les conduites d'arrivée et de sortie.
Avant l'amenée des eaux usées contenant de l'huile minérale,
il faut
•
vider, nettoyer complètement et de nouveau remplir l'installa-
tion.
•
soulever le flotteur dans le tube principal et vérifier sa position
de flottage et sa mobilité. Séparateur à coalescence : l'intro-
duire dans la direction prévue.
6.2 instruction / transfert
La mise en service doit être exécutée par une entreprise
spécialisée qualifiée.
1. Les personnes suivantes doivent être présentes lors du
transfert
•
Personne responsable désignée par le maître de
l'ouvrage
•
Entreprise spécialisée
Nous recommandons en outre la participation
•
du personnel de service
•
de l'entreprise spécialisée dans l'élimination des déchets
2. Instruction:
•
Contrôle de l'installation, portant sur l'étanchéité, les
dégâts dus au transport et au montage ainsi que le con-
trôle des raccordements de conduite
•
Information sur l'élimination des déchets (aspiration)
•
Présentation pratique des possibilités d’utilisation
3. Documentation
•
Transfert de l'instruction de montage et du mode d'em-
ploi
•
Elaboration du procès-verbal de remise.
6.3 procès-verbal de remise
Le procès-verbal de remise doit être rempli complètement
et signé par le responsable de la réception et l'exploitant de l'in-
stallation
Summary of Contents for 99403.10B
Page 144: ...12 DOP Deklaracja wla ciwo ci 144...
Page 145: ...12 DOP Deklaracja wla ciwo ci 145...
Page 146: ...12 DOP Deklaracja wla ciwo ci 146...
Page 147: ...147...