5. Installazione e montaggio
86
135 mm
Schlammabsaugung
Pinorrek
Ölabsaugung
Arretiervorrichtung
Ruhewasserspiegel
Oberkante
Ölabsaugung
¦
150 mm
5.6 Aspirazione di olio e fango
(per pozzetto LW 1000 solo su richiesta)
Per lo smaltimento normale, il tubo flessibile dell'autospurgo
viene tenuto nel separatore di liquidi leggeri e l'intero contenuto
viene prelevato con pompe.
La quantità di liquido leggero è tuttavia notevolmente inferiore
rispetto al volume complessivo del separatore. Qui pone rime-
dio il dispositivo di aspirazione dell'olio.
Per lo smaltimento del liquido leggero, il tubo di aspirazione
viene accoppiato al dispositivo di aspirazione dell'olio. L'auto-
spurgo può così smaltire solo il volume corrispondente alla
quantità massima di liquido leggero.
Questo significa una notevole riduzione della quantità da smal-
tire. Ciò comporta un risparmio di tempo durante lo smaltimento
e costi più contenuti. Analogamente al dispositivo di aspirazione
dell'olio, la quantità di smaltimento può essere ridotta sensibil-
mente tramite il dispositivo di aspirazione del fango.
Questo è un vantaggio soprattutto per le aziende con un'alta
formazione di fango. Con il dispositivo di aspirazione del fango
si può naturalmente svuotare anche l'intero separatore.
Se per lo smaltimento vengono usati entrambi i dispositivi, as-
sicurarsi che venga smaltito prima l'olio e poi il fango. Il dispo-
sitivo di bloccaggio viene fissato sull'entrata con la staffa per
tubi, come da disegno. Montare l'aspirazione dell'olio al dispo-
sitivo di arresto, in modo che mantenga la distanza dallo
specchio d'acqua calmo prescritta nel disegno; quindi regolare
e fissare.
Montare l'aspirazione del fango sul dispositivo di bloccaggio,
fare arrivare sul fondo e poi fissare.
Con le viti in acciaio inox accluse montare i Pinorrek nel rialzo
come da disegno.
Per il foro usare solo un punta del Ø di 3,5 mm. Usare il Pinorrek
come maschera per foratura. Montare il giunto Storz sull'estre-
mità del tubo flessibile e fissare con una fascetta serramanicot-
to. Agganciare il tubo flessibile con il giunto Storz in alto nel Pi-
norrek, portare fino al dispositivo di aspirazione e tagliare fino
a ottenere la misura adatta. Collegare il tubo flessibile e il dis-
positivo di aspirazione e fissare con una fascetta serramanicot-
to. Con la copertura chiusa, questa non deve toccare il giunto
Storz.
Aspirazione fango
Aspirazione olio
Dispositivo di arresto
Specchio d'acqua calmo
Bordo superiore
aspirazione olio
Summary of Contents for 99403.10B
Page 144: ...12 DOP Deklaracja wla ciwo ci 144...
Page 145: ...12 DOP Deklaracja wla ciwo ci 145...
Page 146: ...12 DOP Deklaracja wla ciwo ci 146...
Page 147: ...147...