![background image](http://html1.mh-extra.com/html/microlene/as10a/as10a_manual_1786793001.webp)
Please pass these instructions on to the operator of this equipment.
DO NOT DISASSEMBLE ANY COMPONENTS UNTIL YOU HAVE FULLY READ
THESE INSTRUCTIONS. Unit is supplied fully assembled.
Installation on a flooded suction is recommended. Installation under vacuum is
not advised, any damage to persons or associated equipment will not be covered
under this guarantee.
Maximum operating pressure is identified overleaf. If the maximum pressure is
exceeded or if operating close to this pressure fit a suitable pressure limiting valve
before the filters.
WARNING: This system operates under pressure. Under no circumstances should
the system be disassembled unless the internal pressure of the unit has been
relieved. Failure to observe this warning will expose persons to the possibility of
personal injury and may result in damage to the product or other property.
This unit is designed to filter the cold water line at ambient temperatures
(0ºC to 50ºC).
The appliance is not intended for use by young children or infirm persons without
supervision. Young children should be supervised to ensure they do not play with
the appliance.
If installing on Australian Municipal water sources, a dual check valve and back
flow prevention device must be fitted prior to this system.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Twin Filter
Housing Kits
Installation and
Warranty Instructions
Housing kit only models: AS10A, AS10J & AS20J
Supplied with filters models:
Rainwater Solution – KAS10J and KAS20J
Mains Water Solution – KAS10JM and KAS20JM
FOR THE CORRECT OPERATING AND MAINTENANCE OF THIS PRODUCT,
IT IS ESSENTIAL TO OBSERVE THE MANUFACTURER’S INSTRUCTIONS