UNIT INSTRUCTIONS
WITH IMPORTANT SAFEGUARDS
AND WARRANTY
UL Approved Pump Motor
120V 60 HZ .03A
FILTER MODEL # ASZEP10-PL
COPYDATE 7/15/2019
For Household Use Only
Children Under 13 Must Be
Supervised By An Adult
Locate the adjustable hanger bracket included
with your filter unit. It could have been placed
inside the filter cartridge compartment.
Place the hanger bracket at 90° and align one
of the adjustment holes onto the mounting post
as shown in the illustration
ABOVE.
Then rotate the hook until the hanger is vertical
as shown in the illustration
BELOW.
HANGER INSTALLATION
MAINTAINING PROPER WATER LEVEL
TECHNICAL DATA
FILTER
WATTAGE
FLOW RATE
(GPH)
REPLACEABLE
CARTRIDGE
ASZEP10-PL
3.6
30
S
AQUARIUM INTERNAL
POWER FILTER
HANGER BRACKET
HANGER POST
PLACE WIRE THROUGH
CLEAT ON HANGER
THIS LINE
IS SHOWN ON THE FRONT OF
THE SHROUD DEFLECTOR. IT IS THE OP-
TIMAL WATER LEVEL. MAINTAINING THIS
LEVEL ASSURES PROPER OPERATION.
HIGH LEVEL
LOW LEVEL
Important: Before using the filter submerge the
unit entirely under water until all bubbles disap-
pear. Then hang the filter on the side of the
tank. Always keep in mind the Water level on the
filter is very important to keep it running quiet
and efficient. Allowing the level to drop below
minimum will allow the pump to run dry.
DO NOT RUN PUMP DRY
.
