Clayton WH-105-4 Safety, Operation & Maintenance Download

Page: 1 / 16

WARNING

Respiratory protection is recommended

operating this equipment.

WARNING

Eye protection is required when operating this

equipment.

WARNING

Hearing protection is recommended when

operating this equipment.

WARNING

Read and understand operator’s manual before

using this equipment.

SAFETY LEGEND

WARNING

WH-4

August 03, 2021

Safety – Operation – Maintenance

Keep this document in a safe place

Read and understand this manual before operating your air tool

• A HEPA Filter must be installed in this vacuum at all times.

• If this vacuum is used to collect hazardous material, appropriate personal protective equipment may be required.

• Any alteration to this equipment by a third party will nullify its warranty.

WartHog WH Power Head

Pneumatic Industrial HEPA Vacuum

Models: WH-105-4, WH-107-4, WH-115-4, WH-202-4, WH-205-4, WH-215-4

• Designed for toxic dust cleanup, housekeeping, and vacuum sanding

• Dry Recovery Only

WH-4_cover

Scan this QR code for

online instructions and

documentation, or visit

www.ClaytonHowTo.com

Summary of Contents for WH-105-4

















Search results

Summary of Contents for WH-105-4

Reviews:

Related manuals for WH-105-4

Brands by name

Popular brands

Clayton WH-105-4, Safety, Operation & Maintenance

Search results

Summary of Contents for WH-105-4

Reviews:

Related manuals for WH-105-4

Brands by name

Popular brands