Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 55 / 221
Strict confidential
Figure 26: Connectors and user interfaces of the LoRa LOC module
The RF1 connector is on the left side of the front-end lid.
The RF2 connector is on the right side of the front-end lid.
The positions of the RF1 and RF2 connectors are indicated on the sticker on top of the LoRa
LOC module as follows:
Figure 27: RF1 and RF2 connectors of the LoRa LOC module
Note:
RF1 stands for RF path 1, RF2 stands for RF path 2.
RF1 connector
RF2 connector
