Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 129 / 221
Strict confidential
The Wirnet iBTS 923 is also compliant to both FCC and CE regulations.
Applicable documents:
-
CFR 47 FCC Part 15 :
o
FCC 47 CFR Part 15 : 2014 - Part 15- Radio frequency devices
o
FCC PART 15.247 - Operation within the bands 902–928 MHz, 2400–2483.5
MHz, and 5725–5850 MHz (frequency hopping and digitally modulated)
FCC Part 15.207 conducted emissions on AC mains in the band 150kHz
– 30MHz
FCC Part 15.247 intentional radiated emissions
FCC Part 15.215 Additional provisions to the general radiated
emissions limitations
-
Article 3.2 of the R&TTE Directive :
o
EN 300 220-1, issue 3.3.1
o
EN 300 220-2, issue 3.3.1
The Wirnet iBTS 923 is considered as a category 1.5 receiver according to the EN
300 220-1.
Note 1:
The power supply of the Wirnet iBTS 923 must be a limited power source.
Note 2:
Depending on the countries, check the specific regulations applying, especially regarding
frequency range, maximum EIRP, duty cycle allowed, maximum transmit duration, carrier
sense mandatory or not, etc …
Some specific rules are detailed hereafter for specific countries.
2.3.1
Australia
M2M Connectivity is the only Responsible Supplier of the Wirnet iBTS 923 and Wirnet iBTS
Compact 923 under the ACMA registration process. The company acts as importer of the
Wirnet Station 923 and agreed to let Kerlink affix the product with the RCM mark.
The Wirnet iBTS 923 complies with the requirements of the relevant ACMA Standards made
under the Radiocommunications Act 1992 and the Telecommunications Act 1997. These
Standards are referenced in notices made under section 182 of the Radiocommunications
Act and 407 of the Telecommunications Act.
The applicable Standard are:
Radiocommunications (Short Range Devices) Standard 2014
AS/NZS 4268: 2017: Radio equipment and systems – Short range devices – Limits and
methods of measurement
