Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 30 / 221
Strict confidential
1 x M16 blind stop. It is considered as provision for an N-SMB connector to be used
for additional LoRa antenna or external power supply cable gland.
An internal metal plate features a GNSS/LTE antenna bracket. An internal GNSS/LTE
magnetic mount antenna is placed on this bracket.
Blind threaded standoffs are inserted in the rear side the enclosure. They are used to screw
and maintain the modules inside the enclosure. The modules can be easily inserted and
extracted for maintenance and upgradability purposes.
The Figure 9 below shows the different components inside the enclosure.
Figure 9 : Wirnet iBTS Compact internal view
LoRa antenna
bracket
Mounting kit
N-SMB
adapter
M16 blind
stop
Screw-in
vents
Sticker w/ serial
number, regulatory, …
Sticker for regulatory
(FCC, IC, ANATEL, …)
Top hinge
