Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 178 / 221
Strict confidential
For safety reason, the metallic mounting kit must own a good earth connection. This is
ensured by adding an earth connection on the dedicated hole (see §4.6.1.1).
4.5.5
Mounting of the accessories
4.5.5.1
Indoor PoE injectors
Both indoor PoE injectors described in §1.6.1 can be wall mounted with 2 x M3 screws.
Figure 120 : Screws for indoor POE injectors mounting
4.5.5.2
Outdoor PoE injectors
Both outdoor PoE injectors described in §1.6.1 can be wall mounted using 3 x M3 screws
(positions 1, 2 and 3 below):
Figure 121 : Screws for outdoor POE injectors mounting
2 x M3 screws
2 x M3 screws
3 x M3 screws
