Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 76 / 221
Strict confidential
EN 55024 (Immunity)
VCCI
Safety Approvals
UL/cUL Per IEC 60950-1
GS Mark Per IEC 60950-1
Note 1:
beware of the operating ambient temperature. Output power derating over +40°C is
critical and has to be carefully considered to insure proper supply of the Wirnet iBTS.
The following figure details the indoor AC/DC Midspan PoE injector 60W:
Figure 39 : indoor 60W AC/DC POE injector
The indoor AC/DC Midspan PoE injector 60W can be provided with E/F type cable (Europe)
or B type cable (USA). See §6 to order the required version.
Note 2:
this indoor PoE injector must be connected to an industrial electrical installation
including lighting protections. It must include a main board with surge protections type 1
and a secondary board with surge protections type 2.
If the electrical installation does not meet those requirements, use an alternate PoE injector
featuring better surge protection as detailed in §1.6.1.7.
Note 3:
this PoE injector is intended for indoor applications only.
In case the PoE injector cannot be installed indoor, use an alternate PoE injector dedicated
to outdoor applications as detailed in §1.6.1.7.
