Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 133 / 221
Strict confidential
Technical Requirements for Radio Equipment of Standard of Safety Facility (RRA Public
Notification 2012-31, Dec 28, 2012)
Technical Requirements for the Human Protection against Electromagnetic Waves (KCC
Public Notification 2012-2, Jan 5, 2012)
Technical Requirements for Measurement and Test Procedure of Specific Absorption
Rate (RRA Public Notification 2012-23, Dec 6, 2012)
Technical Requirements for Measurement of Electromagnetic Field Strength (RRA Public
Notification 2012-21, Nov 6, 2012)
Equipment to be subject of Test Procedure for Electromagnetic Field Strength and
Specific Absorption Rate (KCC Public Notification 2012-1, Jan 5, 2012)
Conformity Assessment Procedure of Radio Equipment (RRA Announce 2011- 32, Dec
27, 2011)
KN 301489-1: 2012-06 – test method of common technical EMC for radio equipment
KN 301489-3 – Test method of EMC for radio equipments of short-range.
KN 301489-7: 2008-5 – Test method of EMC for mobile and portable radio
telecommunications systems.
KN 301489-24: 2008-5 – test method for EMC for mobile and portable radio and
ancillary equipment
K60950-1 (2.0) - Information technology equipment – Safety – Part 1: General
requirements
In Republic of Korea, the Wirnet iBTS 923 can be used with the following limitations:
Item
Specification
Frequency range
920.9-923.3MHz
Max EIRP
200mW (23dBm)
Max conducted power with 6dBi antenna
17dBm
Max conducted power with 3dBi antenna
20dBm
Carrier sense (LBT)
5ms / -65dBm
Transmit duration
< 4s
Pause duration
> 50 ms
Duty cycle
<2% in 20 s duration
The frequency channels arrangement must be compliant to the LoRaWAN specification and
the regional parameters (KR 920-923MHz) as defined in [1] and [2].
2.3.5
New-Zealand
Due to mutual Recognition with Australia, the Wirnet iBTS 923 is exempted from the
requirement to be the subject of a New Zealand declaration of conformity and to comply
with New Zealand labelling requirements, provided the product is declared, labelled and
supplied in accordance with the Radiocommunications (Compliance Labelling) Notice 2003,
