Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 81 / 221
Strict confidential
Note 1:
beware of the operating ambient temperature. Output power derating over +55°C
has to be carefully considered to insure proper supply of the Wirnet iBTS.
The following figure details the outdoor AC/DC Midspan PoE injector 30W:
Figure 42 : Outdoor 30W AC/DC POE injector
Note 2:
this PoE injector must be connected to an industrial electrical installation including
at least a main board with surge protections type 1.
1.6.1.7
Outdoor AC/DC Midspan PoE injector 60W
The outdoor AC/DC Midspan PoE injector 60W characteristics are detailed in the following
table:
Description
Specification
Ethernet data rates
10/100/1000Base-T
Number of ports
1
PoE compatibility
IEEE 802.3at
IEEE 802.3af compatible
PoE Output Power
60 Watts over 4 pairs
PoE Output Voltage
55 VDC
PoE Pin Assignment and Polarity
Data Pairs 1/2 (-) and 3/6 (+)
Spare Pairs 7/8 (-) and 4/5 (+)
Input Power Requirements
AC Input Voltage: 100 to 240 VAC
AC Input Current: 2A @100-240VAC
AC Frequency: 50 to 60 Hz
Dimensions
170 mm x 140 mm x 60 mm
Weight
1400g
