Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 132 / 221
Strict confidential
2.3.3
Indonesia
-SDDPI Certification required-
The Wirnet iBTS 923 is compliant to:
PERSYARATAN TEKNIS ALAT DAN PERANGKAT TELEKOMUNIKASI JARAK DEKAT (SHORT
RANGE DEVICE) – 22 November 2012
KEPDIRJEN No. 370 / DIRJEN / 2010 for 2G WAN part
KEPDIRJEN No. 173 / DIRJEN / 2009 for 3G WAN part
In Indonesia, the Wirnet iBTS 923 can be used with the following limitations:
Item
Specification
Frequency range
923-925MHz
Max ERP
500mW (27dBm)
Max EIRP
29dBm
Max conducted power with 6dBi antenna
23dBm
Max conducted power with 3dBi antenna
26dBm
Channelization
200KHz
Number of channels
9
Channels center frequency
923.2 MHz +n*0.2MHz (0<=n<=8)
The frequency channels arrangement must be compliant to the LoRaWAN specification and
the regional parameters (AS 923MHz) as defined in [1] and [2].
Note:
A 920-925MHz cavity filter may be required in Indonesia to avoid saturation and
desensitization of the LoRa receiver due to co-located EGSM900 base stations. This cavity
filter is described in §1.8.3.6.
2.3.4
Korea (Republic of)
-RRA Certification and KC label required-
The Wirnet iBTS 923 is compliant to:
Regulations on Radio Equipment (KCC Public Notification 2013-01, Jan 3, 2013)
Unlicensed Radio Equipment Established Without Notice (KCC Public Notification 2012-
102, Dec 5, 2012)
Technical Requirements of Radio Wave Application (RRA Public Notification 2012-29,
Dec 28, 2012)
Measurements of the high-frequency output of radio wave application equipment and
antenna power calculation methods (RRA Announce 2012-30, Dec 28, 2012)
